Guides
To help you get the best results when fitting our synthetic teak composite boards yourself, we have provided some instructions to make sure the process goes smoothly.
Pattern Making Instructions
This is the first step in creating a synthetic marine composite board and is by far the most important. If the template is incorrect, the decking panel won’t fit. Have a look through this guide to help you get the best results.
Cutting Out Panels
Here is a great guide to have at hand when cutting and shaping a pre-made boards. This guide walks you through the steps of drawing your template onto the boat floor panel and explains how to get the best finish.
Deck Laying Instructions
This guide shows you how to lay and glue small pre-made DIY boat floor panels like an expert. Please make sure you have had a look through this if you plan to fit your DIY panel yourself as it can be quite an in-depth procedure. Large synthetic teak boards and complete boat decks would be adhered in a different manner, please seek further information from your local distributor.